INSTRUCTIONS TO USE THE PRINTER

Step 1: Connect all the wires and turn on the printer.

Step 2: Allign the teeth of the Left side tractor with the first line.

Step 3: Allign the right hand side tractor to fit the LR size.

Step 4: Open the lever of both the tractors.

Step 5: Keep the paper in the Left tractor first.

Step 6: Lock the lever of the Left tracker.

Step 7: Keep the paper in the Right side tractor and lock the tractor. Dont keep the paper too tight or too loose.

Step 8: Now, the printer is ready for printing LRs.

Step 9: Book the LR and click on Print. Open the glass cover.

Step 10: LR is printing.

Step 11: After it is printed fully, press the "Tear Off" button once.

Step 12: The paper will come out a little bit.

Step 13: Now you can tear the paper.

Step 14: Now press the "Load/Eject" button once.

Step 15: The paper will go back to the starting position. And you can print the next LR by clicking on the Print button in the software.

Step 16: Now to take print out of CR, release (lift up) the blue lever of Right side tractor.

Step 17: Move the right side tractor to the right.

Step 18: Keep the CR in the tractor and lock the blue lever of the Right side tractor by pressing it down.

Step 19: Now, you can take printout of CR. After printing, follow similar steps that you did in the LR.